User Tools

Site Tools


howto:add-bypass-device

Add a device that bypasses auth

Sometimes when a MAC subscriber isn't permanent enough you could use bypass-auth mode; this is typically the case in layer 3 networks with short DHCP lease periods (port-forwarded servers on the subscriber network). Browse to the subscriber network advanced panel (Network → Network Configuration → gear-symbol next to subscriber network). and scroll half-way down the page:

This only enables that IP/mac subscriber to bypass the authentication methods, the subscriber still needs to acquire his IP address using static configured IP address or (fixed) DHCP-lease:

howto/add-bypass-device.txt · Last modified: 2021/06/03 14:40 (external edit)