User Tools

Site Tools


howto:configure-any-ip

Configure AnyIP

  • You'll first need to create an additional subnet for the guest network where you want to use AnyIP.
    • Network configuration → subnet
    • Add a subnet, enable NAT, disable DHCP and select the correct port.

  • Go to the advanced network settings (Network→ Network configuration → Gearing symbol next to the guest network) and select the newly added AnyIP subnet.

Caveats

When the subscriber configures a gateway IP that lies inside the connected-subnets of the HSMX. The ARP request from the subscriber will not be answered since this mis-configured gateway IP might be taken by another subscriber.

howto/configure-any-ip.txt · Last modified: 2015/08/20 10:16 by ewald